Website
Support Center
easyConnect
English
Request login Log in
English
Request login Log in
Website Support Center easyConnect
- Product Catalogue
- Back
- Connectivity
- Back
- Terminal Blocks
- Connectors
- PCB Terminals and Connectors
- Enclosure Systems and Components
- Contactless Connectivity
- Cable Entry Systems and Components
- Cord sets, Patchcords and Cables
- PLC Interfaces and Migration Solutions
- Service Interfaces
- Distribution Boxes
- Electronics
- Back
- Analogue Signal Conditioning
- Power Supplies
- Electronics Housings
- Lightning and Surge Protection
- e-mobility
- Photovoltaics
- Fieldbus Distributors
-
- Back
- Controls
- I/O Systems
- Industrial Ethernet
- Touch Panels
- Engineering and Visualisation Tools
- Measuring and Monitoring Systems
-
- Back
- Tools
- Automatic Machines
- Software
- Markers
- Industrial printers
- Industry Light
- Cabinet Infrastructure
- Assembly
- Back
- Modified and Assembled Enclosures
All categories Connectivity Electronics Assembly
- Home
- Product Catalogue
- Electronics
- Lightning and Surge Protection
- pluggable VSPC series
- Pluggable arresters for VSPC
- Combi-module protects 24V supply voltage and a current loop
- VSPC 1CL PW 24V
Surge protection for instrumentation and control, without warning function / function indicator, UP(L/N-PE) ≤ 0.8 kV
Item No.8951510000
Properties
General ordering data
Version | Surge protection for instrumentation and control, without warning function / function indicator, UP(L/N-PE) ≤ 0.8 kV |
Order No. | 8951510000 |
Type | VSPC 1CL PW 24V |
GTIN (EAN) | 4032248742752 |
Qty. | 1 items |
Dimensions and weights
Depth | 69 mm |
Depth (inches) | 2.717 inch |
Height | 90 mm |
Height (inches) | 3.543 inch |
Width | 17.8 mm |
Width (inches) | 0.701 inch |
Net weight | 50 g |
Temperatures
Storage temperature | -40 °C...80 °C |
Operating temperature | -40 °C...70 |
Humidity | 5...96 % |
Probability of failure
SIL in compliance with IEC 61508 | 3 |
MTTF | 2,537 a |
SFF | 95.67 % |
λges | 45 |
PFH in 1*10-9 per hour | 1.95 |
Environmental Product Compliance
REACH SVHC | Lead 7439-92-1 |
SCIP | 71e97bb7-979f-4330-94c0-20c629bb05e3 |
Power protection Class III
Combined pulse UOC | 6 kV |
Max. continuous voltage, Uc (AC) | 27 V |
Max. continuous voltage, Uc (DC) | 38 V |
Protection level UP (typ.) | ≤ 0.8 kV |
Rated voltage (AC) | 24 V |
Rated voltage (DC) | 24 V |
Rated data UL
Certificate No. (UL) | E311081 |
UL certificate | [UL 497b Certificate](PDF/E311081VOL1SEC2.pdf) |
CSA protection data
Gas group C | IIB |
Gas group D | IIA |
Gas groups A, B | IIC |
Input voltage, max. Ui | 39 V |
Internal inductance, max. LI | 0 µH |
General data
Colour | orange |
Design | Terminal miscellaneous |
Optical function display | For Class III protection green = OK; red = arrester is defective - replace |
Protection degree | IP20 |
Segment | Measurement - Monitoring - Setting |
UL 94 flammability rating | V-0 |
Version | without warning function / function indicator |
Insulation coordination acc. to EN 50178
Pollution severity | 2 |
Surge voltage category | III |
Rated data IEC / EN
Combined pulse UOC | 6 kV |
Discharge current Imax (8/20µs) GND-PE | 10 kA |
Discharge current Imax (8/20µs) wire-PE | 10 kA |
Discharge current Imax (8/20µs) wire-wire | 10 kA |
Discharge current In (8/20µs) GND-PE | 2.5 kA |
Discharge current In (8/20µs) wire-PE | 2.5 kA |
Discharge current In (8/20µs) wire-wire | 2.5 kA |
Fuse | 0.5 A |
Lightning test current, Iimp (10/350 µs) GND-PE | 2.5 kA |
Lightning test current, Iimp (10/350 µs) Wire-PE | 2.5 kA |
Lightning test current, Iimp (10/350 µs) wire-wire | 2.5 kA |
Max. continuous voltage, Uc (AC) | 27 V |
Max. continuous voltage, Uc (DC) | 38 V |
Number of poles | 1 |
Overload - failure mode | Modus 2 |
Protection level on output side Wire-PE 1kV/µs, typically | 450 V |
Protection level on output side Wire-wire 1 kV/µs, typically | 60 V |
Protection level on output side Wire-wire 8/20 µs, typically | 60 V |
Protection level UP (typ.) | ≤ 0.8 kV |
Protection level, UP GND - PE | 450 V |
Protection level, UP wire - PE | 450 V |
Protection level, UP wire - wire | 40 V |
Pulse-reset capacity | ≤ 10 ms |
Rated current | 450 mA |
Rated current IN | 10 A |
Rated voltage (AC) | 24 V |
Rated voltage (DC) | 24 V |
Requirements category acc. to IEC 61643-21 | C1 C2 C3 D1 |
Signal transmission properties (-3 dB) | 3 MHz |
Signalling contact | No |
Standards | IEC 61643-21 HART-compatible |
Surge current-carrying capacity C1 | < 1 kA 8/20 μs |
Surge current-carrying capacity C2 | 5 kA 8/20 μs |
Surge current-carrying capacity C3 | 100 A 10/1000 μs |
Surge current-carrying capacity D1 | 2.5 kA 10/350 μs |
Voltage type | AC/DC |
Volume resistance | 2.20 Ω |
Further details of approvals
GOST certificate | [GOST-Zertifikat](PDF/7950_n1-n4.pdf) |
Connection data
Type of connection | Pluggable in VSPC BASE |
Ratings IECEx/ATEX/cUL
cUL certificate | [cUL Certificate](pdf/VSPC.PDF) |
Important note
Product information | Mode 2: State where the voltage-limiting part of the SPD was short-circuited due to a very low impedance within the SPD. The line is inoperable, but the measuring equipment is still protected by means of a short-circuit. |
Downloads
Approval/Certificate/Document of Conformity | [SIL Paper](https://mdcop.weidmueller.com/mediadelivery/asset/900_35329) [EU_Konformitätserklärung / EU_Declaration_of_Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_86287) |
Engineering Data | [CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_45846) |
Eplan Data Portal | [Eplan data](https://dataportal.eplan.com/part-details/WEI.8951510000) |
CADENAS eCATALOG | [CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=8951510000) |
WSCAD Universe | [WSCAD data](https://wscaduniverse.com/part-detail?manufacturerId=88&type=0&partNumber=8951510000&norm=0) |
User Documentation | [Beipackzettel / Instruction sheet](https://mdcop.weidmueller.com/mediadelivery/asset/900_35342) |
Catalogues | [Catalogues in PDF-format](LINK/Catalog.html) |
Classifications
ETIM 6.0 | EC000943 |
ETIM 7.0 | EC000943 |
ETIM 8.0 | EC000943 |
ETIM 9.0 | EC000943 |
ECLASS 9.0 | 27-13-08-07 |
ECLASS 9.1 | 27-13-08-07 |
ECLASS 10.0 | 27-13-08-07 |
ECLASS 11.0 | 27-13-08-07 |
ECLASS 12.0 | 27-17-90-90 |
ECLASS 13.0 | 27-17-90-90 |
Tender specification sheets
Long specification | Surge protection plug for base element VSPC BASE 1CL PW with dual protective circuits, for power supply and a paired cable for floating-ground powered signal circuit (forexample, supply isolation amplifiers) protective switched power supply: temperature controlled varistors as a cross-protection between the active lines. Coarse protection of the common mode voltage to earth. Optical defect signal coupled with the temperature monitoring. Protective circuits, floating-ground driven signal circuits: two-stage protection switches consisting of coarse and fine protection between the signal wires as well as decoupling resistors. Mechanical identification of the plug to the base element according to the switching type and rated voltage. Protected plug with coding pin and counter-profile for the base element. Optical identification of the protected plug based on the type of protected switching and the voltage level. It is possible to mark the plug. |
Short specification | Surge protection plug for base element VSPC BASE 1CL PW with dual protective circuits, for 24 V power supply and a paired cable for floating-ground powered signal circuit. |
Approvals
Approvals | ![CE](/picture/CE.gif) ![FUSAFETY](/picture/FUSAFETY.gif) ![UL](/picture/UL.gif) |
ROHS | Conform |
UL File Number Search | [UL Website](LINK/UL_search.html) |
Certificate No. (UL) | E311081 |
Accessories